KIT- V4 Ultimate Expansion Board
The KIT - V4 Ultimate Expansion Board is assembled in a high quality brushed metal case with a glass top. You just have to add your V4/ V4+ and than you can use the following functions of the expansion board:
16-bit high-quality analogue audio output, with separate ultralow-noise LDO power regulator. 112 dB SNR, and -93 dB THD. Playback both PAULA AND ARNE audio at high quality!
Pass-through of analogue audio out to case 3.5 mm audio jack using the standard case HD AUDIO/AC97 connector.
MIDI in/out (serial.device; using beat-buddy format connector due to space constraints).
Buffered serial UART in/out for FTDI cable (serial.device), 3V3 only (FTDI cable provided).
RS232 in/out (RX/TX lines) (serial.device).
Integration with standard ITX front-panel case buttons and LEDs.
Full hardware cold reset from a single press of the case power/reset button.
Full startup/shutdown from the ITX case power button (power removed from V4). Soft glowing LED when the V4 is powered down.
LED output selectable for single-led system (combined POWER and IDE access) or dual-led system (separate POWER and IDE access).
12V input from a wide range of inputs: a barrel jack connector (external), ATX PSU connector (internal), or PC peripheral connector ('Molex') (internal).
Separate 5V lines for powering the Apollo V4, and peripherals (e.g., USB).
Provision of SAFE +5V and +12V passthrough for powering external components like drives/CD-ROMs for the V4.
Smart power meter for voltage and current measurement of the 12V supply, and two 5V lines.
Passthrough for legacy DB9 mice and joysticks. USB keyboard port from the V4 is accessible directly from the rear panel of the Ultimate Expansion Board.
USB mouse accessible via USB header on the board, for connection to case or expander USB ports. Both USB2 and USB3 headers are provided to ensure maximum case compatibility.
Second USB gamepad port provided on the internal USB header, for both V4 and V4+ systems (i.e., it provides the second gamepad port for original V4 board owners).
Mini-ITX form factor, for install into any Mini-ITX compatible case.
A 3-pin fan header for powering 12V fans.
Internal mounting of USB blaster with mini-USB socket on the rear ITX panel, for easy FPGA programming. No more opening of the case to plug in the USB blaster!
Internal programming header for on-board microprocessor (3V3 FTDI)
Multi-colour LED back-lit V4 logo
1.8" 160x128 pixel colour LCD, with communication directly from the Apollo V4!
On-board temperature sensor for system monitoring.
A compact-flash extender to enable you to remove and change compact-flash cards without opening the case.
Please Select a size
Please Select a Colour
Product prices displayed include VAT for Germany but exclude shipping costs. VAT for other countries will be calculated at Checkout.